Mac3 MAC3 Neoprene Cable Gold Contact


Product Code: NGMxx06UB0

Manufacturer: MAC3

Datasheet: MAC3 

Gold contacts are required in applications using low dc voltage with low current (less than 0.5A). This is typically when connecting the switch to a control system such as PLC, DCS, BMS or SCADA system that is reading the status of the switch using low dc voltage typically 12 or 24 Vdc. Also in Hazardous environments (EX ia) when connecting the switch through a IS Barrier, gold contacts should be used.

The MAC3 float configuration from MAC3 is the most robust version. A round shape with smooth profile and extra strong construction which is best for sewage, waste and other fouling applications. The Neoprene cable is the most versatile configuration suitable for general water and wastewater applications including when there is a presence of fats, oils and/or grease. Use the version with Hypalon cable if aggressive chemicals are present but first check for chemical compatibility.

Stocked in a 3 wire configuration (change over contact), suitable for filling and emptying applications. Stocked with cable lengths of 5m, 10m, 15m, 20m, 30m. Other lengths can be available under special order.

To order a configuration not included in the above list or request a quotation, send your request to:

or Contact us for more information on 0432 114 574 or 02 9319 1808

MAC3 Neoprene Gold

The minimum working distance between the MAC3 level regulator and the fixing point is 20 cm. The optional counterweight can be purchased to eliminate the need for fixing the cable inside the tank or pit.

Application Areas:

Industrial processes using control systems and Hazardous (EX) environments for water and waste water level measurement and control.

Technical Specifications:

1A, 50 Vdc.

see data sheet via the above link for more information